Category Archives: ME

ME10: MILD STEEL PIPES DIAMETER, THICKNESS WEIGHT

Continue reading ME10: MILD STEEL PIPES DIAMETER, THICKNESS WEIGHT

ME08: RECOMMENDED AIR CHANGES PER HOUR (ACH or ACPH)

Continue reading ME08: RECOMMENDED AIR CHANGES PER HOUR (ACH or ACPH)

ME07: EN AISI/ASTM DESIGNATION CONVERSION TABLE OF MATERIALS GRADES

ME06: GALVANIC CORROSION TABLE (GALVANIC VOLTAGES RELATIVE TO GOLD)

METALINDEX [V]
Most cathodic (most noble)
Gold, solid and plated; gold-platinum alloy-0.00
Rhodium-plated on silver-plated copper-0.05
Silver, solid or plated; monel metal; high nickel-copper alloys-0.15
Nickel, solid or plated; titanium and its alloys; monel-0.30
Copper, solid or plated; low brasses or bronzes; silver solder; German silvery high copper-nickel alloys; nickel-chromium alloys-0.35
Brass and bronzes-0.40
High brasses and bronzes-0.45
18%-chromium-type corrosion-resistant steels-0.5
Chromium plated; tin plated; 12%-chromium-type corrosion-resistant steels-0.6
Tin-plate; tin-lead solder-0.65
Lead, solid or plated; high lead alloys-0.7
2000 series wrought aluminium-0.75
Iron, wrought, gray, or malleable; low alloy and plain carbon steels-0.85
Aluminium, wrought alloys other than 2000 series aluminium, cast alloys of the silicon type-0.9
Aluminium, cast alloys (other than silicon type); cadmium, plated and chromate-0.95
Hot-dip-zinc plate; galvanized steel-1.2
Zinc, wrought; zinc-base die-casting alloys; zinc plated-1.25
Magnesium and magnesium-base alloys; cast or wrought-1.75
Beryllium-1.85
Most anodic (least noble)

For high humidity and salty (harsh) environments, outdoors there should be no more than 0.15V difference in the anodic index of the two metals. This is 0.25 for normal conditions like warehouses and 0.5 for air controlled rooms.

The main logic is the closer two metal to each other in the table, they will be more suitable to use together.

ME05: MAXIMUM RECOMMENDED FLOW VELOCITY ACCORDING TO WATER TEMPERATURE

Flow velocities should be restricted to reduce system noise. Here is the table for maximum recommended flow velocity according to water temperature.

Continue reading ME05: MAXIMUM RECOMMENDED FLOW VELOCITY ACCORDING TO WATER TEMPERATURE

ME04: NFPA 20 PUMPS THEORETICAL CONDITIONS CALCULATOR

Continue reading ME04: NFPA 20 PUMPS THEORETICAL CONDITIONS CALCULATOR

ME03: 50 Hz to 60Hz Q and H conversion

Continue reading ME03: 50 Hz to 60Hz Q and H conversion