Rulers were the most important part of engineering. Before we had cad software, we were drafting using t-squares and set squares. If you had that manual drafting course you will get what it was like and be thankful to AutoCAD. But on the other hand it was real art to draw that drawings by hand. If you are really good at you may draft as fast as you can do at CAD but the main disadvantage with hand drafting is that you can’t do the revisions easily as you do in cad.
Continue reading RULERS OF OLD GOOD TIMESCategory Archives: MEBLOG
YOU WILL REGRET IF YOU MISS THESE 3D MODELLING EVENTS!
Solidworks is a CAD software with which you can easily draft 2D and 3D solid models. If you are new to this or if you are really using professionally Solidworks, we have a good link for you.
Continue reading YOU WILL REGRET IF YOU MISS THESE 3D MODELLING EVENTS!NEW EQE FROM MERCEDES
Mercedes Benz introduced their new great model EQE. This model is very similar to EQS in design point of view.
Continue reading NEW EQE FROM MERCEDESBENEFITS OF CONNECTING YOUR SOLIDWORKS TO 3DEXPERIENCE
3DEXPERIENCE platform is a place where you can collabrate on 3D models. This is a place where you can work on the same 3D model together with your colleagues. If you don’t have this level system then you will struggle updating drawings etc. You will start to lose time. Especially for projects/products that has so many parts, it is a must to have.
Continue reading BENEFITS OF CONNECTING YOUR SOLIDWORKS TO 3DEXPERIENCE
HOW TO CONVERT ANYTHING TO DWG/DXF FOR CAD SOFTWARE FREE
Sometimes you have a drawing as pdf or picture and although you really want to use them in your CAD software you can’t use it. Actually there are converting software and online websites but you can yourself create your own dwg/dxf format drawings from any pdf or picture easily. Actually after this methods you will be able to CONVERT ANYTHING ON YOUR SCREEN TO DWG.
Continue reading HOW TO CONVERT ANYTHING TO DWG/DXF FOR CAD SOFTWARE FREE
DIFFERENCE BETWEEN CONDENSING AND NON CONDENSING BOILER (COMBI)
DRAFTING WITH NANOCAD: HOW TO INSTALL, HOW TO DRAW A LINE
Without a CAD an engineer is nothing these days. If you want to design something you need these tools guys. On the other hand if you don’t want to pay lots of money and you want to try this programs or you have less design issues you may use AutoCAD like free programs. Because most of the time these programs are very expensive for students or for people that does not use all of the features of the CAD software.
Continue reading DRAFTING WITH NANOCAD: HOW TO INSTALL, HOW TO DRAW A LINEBOUYANCY, EUREKA CAN AND GETTING HEAVIER
DENSITY OF A MIXTURE EASY WAY TO CALCULATE FOR SAME MASS AND SAME VOLUME MIXTURES
If we mix two liquid with the same volume;
Continue reading DENSITY OF A MIXTURE EASY WAY TO CALCULATE FOR SAME MASS AND SAME VOLUME MIXTURESWEIGHT MEASURMENT WITH BALANCE
If we measure weight with balance like shown below;
Continue reading WEIGHT MEASURMENT WITH BALANCE